Battery Disconnect Mersen 2P-160A (NO FUSES)

Description

Description
Battery Disconnect Mersen 2P-160Amp

Fuse switch-disconnectors are intended for fuse-links with blade contacts size 00.
Enable safe disconnection not only of rated current, but also overcurrent up to octuple rated current.
Variability of connecting sets.
Measuring holes in the cover.
It is possible to lock the switch-disconnector cover.
It is equipped with a label for description of the protected circuit
Mounting directly on the panel by means of screws.
Adapter for busbar system with spacing 60 mm, busbar thickness 5 ÷ 12 mm, busbar width 12 ÷ 32 mm for 3-pole.
Terminals can be completed with terminal extensions for connection of conductors of cross-section up to 95 mm2 .
More switch-disconnectors side-by-side or flat can be installed without limitation of electrical parameters.
Connection Bottom connection is possible without limitation of electric parameters.

Rated operating voltage AC/DC 690 V
Rated operating current 160 A
Utilization category (switching mode) / AC 400 V AC-23B
Utilization category (switching mode) / AC 500 V AC-22B
Utilization category (switching mode) / AC 690 V AC-22B
Utilization category (switching mode) / DC 250 V DC-21B
Thermal current with fuse-link 160 A
Thermal current with disconnecting link ZP000 250 A
Rated frequency 40 ÷ 60 Hz
Rated conditional short-circuit current (RMS) AC 400 V 120 kA
Rated conditional short-circuit current (RMS) AC 500 V 50 kA
Rated conditional short-circuit current (RMS) AC 690 V 50 kA
Rated impulse withstand voltage 12 kV / FH00-.A/., 8 kV / FH00-.S/., 12 kV / FH00-3L/.
Rated short-time withstand current 5 kA
Rated short-circuit making capacity / AC 400 V 16 kA
Rated insulation voltage AC 1000 V
Max. power losses of the fuse-link 12 W
Power losses without fuse-link / In 7 W
Degree of protection from front side, built-in device, cover opened IP20
Degree of protection from front side, built-in device, cover closed IP20